top of page



How to Download and Use StarSat SR-X95USB Loader

How to Download and Use StarSat SR-X95USB Loader

If you have a StarSat SR-X95USB receiver and you want to update its software or recover it from a corrupted state, you will need a loader tool to do that. A loader tool is a software that can communicate with your receiver through a serial cable and send commands and files to it. In this article, we will show you how to download and use the StarSat SR-X95USB loader tool.

Starsat X95 Usb Loader Free Download

Step 1: Download the StarSat SR-X95USB Loader Tool

The first step is to download the loader tool from a reliable source. You can use the link below to download the StarSat SR-X95USB loader tool from SatDL, a website that provides satellite receiver files and tools[^1^]. The file name is and it has a size of 376.15 KB.

Download StarSat SR-X95USB Loader Tool

Step 2: Extract the Zip File

After downloading the zip file, you need to extract it using a software like WinRAR or 7-Zip. You will get a folder named StarSat_SR-X95USB_Loader that contains two files: STB_Erom_Upgrade.exe and STB_Erom_Upgrade.ini. These are the files that you will use to load the software or firmware to your receiver.

Step 3: Connect Your Receiver to Your Computer

The next step is to connect your receiver to your computer using a RS232 serial cable. This cable has a 9-pin connector on both ends and it is usually used for data transfer between devices. You can find this cable in any electronic store or online. Make sure that your receiver is turned off before connecting the cable.

Plug one end of the cable into the RS232 port on the back of your receiver and the other end into the COM port on your computer. If you don't know which COM port you have, you can check it in the Device Manager on your computer. You can also use a USB-to-RS232 adapter if your computer does not have a COM port.

Step 4: Run the Loader Tool

Now that you have connected your receiver to your computer, you can run the loader tool by double-clicking on the STB_Erom_Upgrade.exe file. You will see a window like this:

In this window, you need to select the following options:

  • Port: Choose the COM port that matches your cable connection.

  • Baud Rate: Choose 115200 as the speed of data transfer.

  • Mode: Choose Upgrade as the operation mode.

  • Include Bootloader: Check this option if you want to update or recover the bootloader of your receiver.

  • Erase All Flash: Check this option if you want to erase all the data on your receiver's flash memory.

  • Select & Program: Click on this button to browse and select the software or firmware file that you want to load to your receiver. The file should have a .bin extension and it should be compatible with your receiver model. You can download the latest software or firmware for your StarSat SR-X95USB receiver from SatDL[^1^]. The file name is and it has a size of 920.51 KB.

Download StarSat SR-X95USB Software or Firmware

Step 5: Start the Loading Process

After selecting the software or firmware file, click on Next to start the loading process. You will see a progress bar showing the percentage of completion. Do not turn off your receiver or disconnect the cable during this process. Wait until it reaches 100% and shows a message saying "Upgrade Completed". Then click on Finish to exit the loader tool.


  • グループについて


    bottom of page